Ductwork is essential in residential, commercial, and industrial settings where particle extraction is vital. A good example would be in an industry where dust particles result from the processes. The sheet metal ductwork can extract the particles, thus enhancing space visibility and reducing workspace hazards.
Given the nature of sheet metal ductwork, you must clamp it together. The clamps ensure continuity in the ductwork, ensuring the ductwork is stable while enhancing the flow of materials. If you use the right clamp for the ductwork, you should establish an airtight seal that keeps gases and particles inside the extraction system.
In this guide, we show you how to choose the right clamp for round sheet metal ductwork and how to install it:
Benefits of Round Sheet Metal Ductwork
Is round ducting a good solution for your extraction needs? Of course! It boasts the following advantages:
- It provides an airtight seal that ensures no leakage in the space. Plus, its uniform build provides streamlined airflow, unmarred by unexpected airflow issues. As such, you can rest assured you will not incur unnecessary utility bills caused by leaks. That’s why round ducting is a good choice for HVAC systems and extraction ducting.
- It is easy to install and maintain. The labor and material costs for installing round ducting are low. Their simplistic design makes them easy to fit even in nooks without incurring additional labor and material costs.
- It is aesthetically appealing. While round ducting may be a contemporary look, it still has a positive aesthetic impact. For one, it has a minimalist vibe that ties in with many designs. And secondly, it has an open-air allure that matches commercial, residential, and industrial settings. So, you can leave the ducting exposed without running the risk of a poor image.
- It increases airflow efficiency. The design of round ducting allows air to move through the ducts devoid of resistance. So, air conditioning, particle extraction, and other processes take place optimally. Your AC won’t need to work twice as hard to keep you cool, as the ducting will not work against it.
- It is quiet. Thanks to the airflow efficiency, the ducting results in less noise. This plus is especially important in commercial and residential settings where low noise levels are ideal.
And you can compound these benefits by using the right ductwork and ensuring you have an airtight seal.
How to Choose Clamps for Round Sheet Metal Ductwork
Choosing round sheet metal ductwork will not result in efficient airflow if you do not use the right clamps. So, how can you tell which clamps are right for your ducting?
- Size: Clamps vary in size and have a minimum and maximum fitment, including the adjustable ones. Thus, you should measure your ducting to figure out the clamps that will fit it just right. A clamp that is too tight causes undue pressure on the ducting and can damage it, resulting in leakage. And a loose one will not provide a secure fit and will result in leaks.
- Environment: Your clamp should have a material that can withstand the conditions in which you will use it. We offer different materials for varying temperatures, moisture levels, and wear and tear exposure.
At CLAMPIA, we help you determine the correct dimensions of your ducting clamps to avoid installation errors. Talk to us about your needs, and we’ll set you up with suitable options.
How to Clamp Round Sheet Metal Ductwork
Clamping ductwork might seem a pretty uphill task, but it is not. Clamping a section together is much easier than you would think. Here’s how you do it:
- Start by connecting the ducts you want to clamp together. Their ends should meet, creating a uniform flow between one and the other.
- You then open the clamp and slide it over the flanges until it rests on the interconnecting section. After ensuring the sections are uniform, you should close the clamp. Doing this will create a tight joint that will connect the duct sections. The clamp can then remain in place as it will have joined the ductwork. And you will not need to make any adjustments.
- If the clamp comes with an adjustable draw latch, you can adjust the tension in the joint. So, you can loosen or tighten it based on the fit at the time of closing.
It’s that easy!
Why Choose CLAMPIA Clamps?
We offer a wide range of quick-release ducting clamps ideal for use in HVAC industries, sheet metal ductwork, and applications requiring fast and effective solutions. Our clamps feature many perks, including:
- They are easy to use. You can just slide them over round ductwork and close them to get a tight connection. And removing them is just as easy. You open them and slide them over the ductwork. This ease makes them ideal for use in ductwork sections where maintenance is critical to long-term use.
- They are versatile: Not only can you use our clamps on round ductwork, but you can also use them to secure other things. Examples include glass containers and barrels. Like with round ductwork, clamps on these items provide a secure fit.
- They are hardy: Our clamps feature high-grade materials that can withstand wear and tear and work in harsh environments. Common materials include carbon steel, stainless steel, alloy steel, titanium, and aluminum. As such, you can reuse them in other ductwork or environments as they will last you years with good use.
- They are aesthetically appealing: While aesthetics may not be a primary concern, we ensure our clamps look good. After all, their working mechanism makes them visible on the external surface. And we would not want the ductwork and its accessories to look off in your space!
- They come in different sizes: We know that ductwork differs in functionality. And we thus offer clamps in different sizes to match whatever function you have in mind. Moreover, we customize clamps to suit needs that our current clamps may not meet.
Plus, they are airtight, thanks to their durable sealing gaskets! CLAMPIA offers secure and durable clamping options for round ductwork. Talk to us today about getting the right fit for your space!
