There are many benefits to installing a ducting ventilation system, such as reduced energy consumption and increased productivity due to better air quality in an indoor space. Also, various clamp-together ducting components can be used when installing the ventilation system. This detailed post explores the types of duct fittings included in clamp-together ducting.
What Are Duct Fittings
Duct fittings refer to the items that are used in the ventilating system. These are typically located outside the house and must have a complete ventilation system. For this reason, they come in a variety of sizes and materials. There is also a range of prices for these fittings.
You may not want to use every type of fitting available when setting up your home’s ventilation system. Therefore, it’s important to understand duct fittings, as each serves a different function. Also, the types of fittings included in clamp-together ducting will depend on what size pipe you purchase.
What’s Clamp Together Ducting?
Clamp-together or clamp-on type ductingis a type of ductwork that is not assembled and installed in the field. Rather, it comes with various fittings and other pieces out of the package. Many types of parts can be included with clamp-together ducting systems, including high-quality fittings such as Pressed Collar Saddles for Ventilation Systems.
No matter what type of fitting you need for your project, you should be able to find it in this section. From pipe clamps and flanges to reducers and saddle adapters, these items are necessary to create an efficient ventilation system in your home. Installation is quick and easy when using the clamp-together method because everything needed is available in one convenient kit.
Duct Fittings Included In The Clamp Together Ducting
There’re many duct fittings in quick fit clamp-together ducting, usually include straight duct pipe, duct elbows, sleeves,branches,adapters, duct reducers,blast gates,duct clamps,duct flanges,O-Rings, ball joints, end caps, Floor Sweeps.
Straight Duct Pipe
The most common duct fitting in the clamp-together ducting system is a pipe. The ducting pipe fitting is typically used to assemble a ductwork system to form a straight or curved pathway. Other pipe uses include connecting elbows, reducers, and tees, attaching floor sweeps, and connecting with other clamp-together ducting fittings.
Duct pipes come in various diameters, lengths, and thicknesses. The pipes are inexpensive, and they are relatively easy to install. In addition, you’ll get a significant percentage of them made from metal, making them strong. There’re three types of straights for clamp-together ducing, rolled edge pipe, FB duct pipe and flange duct pipe. Rolled edge straights have rolled angle at both ends, and FB duct have 90degree flange at both ends,while flange pipe means two ends of the pipe have welding flanges.
Another exciting update about these metal fab ductwork pipes is that they can be installed by just about anyone with basic plumbing skills.
Moreover, this duct fitting is primarily applied in dust control system and exhaust ventilation systems like kitchen and bathroom vents. However, they’re not limited to these because they can also be used for intake vents, heating, ventilating, and air-conditioning HVAC systems. Therefore, installing these pipes on your heating or HVAC system will allow you to control airflow better than you could without it.
The fittings feature a cylindrical shape. Also, when attaching the pipe to a different type of metal fab duct fitting, you need to use some form of quick fit clamp,duct tape or sealant, or adhesive so that water doesn’t leak through cracks or crevices.
Duct Elbows
Elbows can be used to make sharp turns or to create transitions between hard and soft surfaces. They are typically available as 90-degree or 45-degree elbows, with the latter being more common. If you need a larger bend radius than is offered on a 45-degree elbow, then you should use a 90-degree model instead.
These manufacturing duct fittings are included in clamp-together ducting because they allow for various shapes and angles. Installing an elbow will provide a 90-degree turn in your duct and create a branch. The branch created from this means there will be two separate airflow pathways instead of just one. With this change comes increased resistance against leakage when the new pathway meets with the old one.
It doesn’t matter which side of the elbow is sealed off because both sides can withstand pressure changes equally well due to having equal airflow capacity. Another advantage to using a galvanized steel elbow is that they can reduce airflow resistance by up to 50%. Every little bit helps with energy efficiency and cost savings when building an efficient duct system!
Sleeves
Clamp-together ducting sleeves are typically a sliding pipe, used to make small extensions to connect ducting drops.They come in various sizes and can be purchased individually or as a kit that includes all sizes needed. Also, the available variety of sizes means it’s easy to find just the right one for any project.
The advantages of clamp-together ducting sleeves include their ease of use and installation. They are also inexpensive, making the perfect choice for DIYers who want to save on labor costs by installing their ductwork.
In general, a sleeve reduces the size of one opening to fit over another, making it possible to join pipes that have different outside diameters.
Branches
Branches are essentially a r or Y shape at the top of the fitting, connecting it to two separate pieces of ductwork. Generally, such branches is used when you want to change direction within a system or add branches on either side of the connector. A branch has three outlets and can be installed by hand without special tools.
Also, these galvanized steel duct triangles come in various lengths, diameters, and materials, including galvanized steel and stainless steel.
Their primary role includes connecting two sections of ventilation pipes for an exhaust system or allowing for an intake of fresh air into an enclosed space. Other uses of these galvanized steel duct fitting include linking ducts together and linking them to structures like a chimney or fireplaces.
One top-notch feature of the galvanized steel branch is their durable, sturdy construction made from quality material. Therefore, this material ensures that these angle joints can last long. The cap fitting is also resistant to corrosion and rust because it is galvanized.
The advantages of these duct branches are that they are more durable than most other fittings and can handle higher pressures. They are also easier to install than other types of connectors because they do not require any glue or screws. The disadvantages of duct branches are that they are more expensive than most other fittings.
Available popular sizes are like single branches with angles of 30° or 45°/double branches with angles of 30° or 45°/branch plates with angles of 30° or 45°.
Adapters
An adapter combines two pipe pieces – and these fittings come in many different shapes and sizes. They are included in the clamp-together ducting because they provide an easier way to assemble your desired configuration. Also, they allow for greater flexibility in choosing what type of fitting and configuration you want.
Moreover, if one fitting doesn’t work out as planned, it is easy to switch out a few adapters and try again. In addition, this hvac ductwork solution does not require cutting off existing pipes, so you don’t have to worry about going through the same process all over again.
Duct Reducers
Reducers in clamp-together ducting help to adjust the size of a duct. Other uses of duct reducers include reducing airflow in heating and cooling systems by reducing the duct’s diameter and increasing resistance to airflow.
These galvanized steel duct caps are the most preferred for various applications, such as ventilation systems. Also, these flexible duct reducers are galvanized and stainless steel for more durability. In addition, they’re often used for connecting straight pipes with flanges to disc-like pipes because they have a large diameter head on one end that seals (using duct tape) tightly with its matching mating joint cap.
Other benefits of duct reducers include making quick connections to round pipes where there’s a need to reduce the size of the opening.
Blast Gates
Blast gates are mainly used to control the airflow when it enters or exits a duct, they are called sliding dampers in some regions. They are also used to redirect airflow in hvac systems by adjusting the opening of the blast gate.
Other advantages of blast gates in clamp-together ducting include the ability to increase or decrease velocity and pressure and the ease with which they can be cleaned and maintained.
In general, the manufacturing blast gates can be useful for controlling airflow and direction, and they come in different shapes and sizes.
Popular types of blast gate sliding damper on the system include manual cut-off blast get, manual heavy duty sliding damper, pneumatic sliding damper and automation sliding damper.
Duct Clamps
Clamp-together ducting also includes clamps. These clamps play a crucial role in the success of your installation and should be used whenever possible to ensure air-tight connections. When choosing the right clamp for your installation, you must choose one appropriate for the type of band design(i.e. V band or U band to fit different design ducting) and material you are using for clamp-together ducting (i.e.,stainless steel or galvanized).
The hvac ductwork clamps used in the clamp-together ducting don’t need a screwdriver or wrench to tighten, they usually have quick lock design, just pull and lock is ok. Also, they make it easier to seal out drafts and dirt. Besides reducing the likelihood of leaks, they also ensure joints can’t shift over time.
Duct Flanges
Duct flanges are an essential component of ductwork, and they come in a wide range of sizes to suit different needs. Unlike clamps, duct flanges provide greater rigidity and stability, making them ideal for use in high-pressure or vibration-prone ductwork. While mounting duct flanges is slightly more complicated than using clamps, the extra effort is well worth it for the increased stability and performance they offer. At our factory, we carry duct flanges with diameters ranging from 80 to 600 mm to suit a variety of needs. Whether you’re looking for a small flange for a simple ductwork installation or a large flange for a complex system, we have the perfect product for you.
O-Rings
O-rings are typically found at the joints between two pieces of duct. Their uses include but are not limited to, sealing the joint from airflow leaks and insulating against sound transfer. O-rings come in various sizes and thicknesses to accommodate different types of joints, so be sure to purchase ones compatible with your current setup.
Advantages of O-rings include the ability to seal out airflow, saving you money on heating or cooling costs. They also help reduce unwanted noise by providing a tight seal where two pieces of metal meet.
The one major downside is that O-rings can shrink over time if exposed to heat or detergents such as bleach, making them much less effective at their job. That’s why it’s best practice to change the mcdaniel metals every few years, depending on how often you use them for insulation purposes.
Ball Joints
Ductwork ball joints can be useful for attaching ducts at a right angle, rotating them around any axis, and locking them into place securely without fasteners. They are generally used where two parts must turn with each other without becoming disconnected, like connecting the straight pipe or flexible hose to allow the rotation of a dust hood.
Ball joints make connections in the middle of the ductwork and often contain a rubber seal that can be compressed by tightening a nut. They are included in clamp-together ducting because of their ease of installation and elimination of leakage since they come with rubber seals.
Other reasons to use them in clamp-together ducting include their ability to quickly reconnect sections of the duct if you need to move it for some reason (for example, for cleaning or repair). Ball joints also come in different sizes and shapes, but all work similarly. They provide a tight seal without requiring additional sealing agents like silicone caulking.
End Caps
End caps are the metal fitting at the end of the duct that prevents airflow from escaping. They are designed to seal off the end of the duct system while allowing additional components, such as an elbow or tee joint, to be added at that location. Moreover, they come in various shapes and sizes and can be used to adjust the direction or size of ducts.
Remember, end caps can allow for some creativity when it comes to design and shape. They are the most preferred for clamp-together ducting because they don’t use any screws, nails, adhesives, or glue and require no special installation tools. Also, galvanized steel end caps have a strong grip on each other, which is why they are often used as the connector between lengths of pipe (pipe connection).
Floor Sweeps
Floor sweeps, which fit around floor vents, help keep dirt and debris out of the duct system. They keep the airflow going in one direction or help sweep up any dust and debris from your vents into your crawl space, so it doesn’t accumulate inside the building. Generally, they maintain the cleanliness of floors near air vents.
The other benefits of ducting floor sweeps include protection against any possible damage from dust particles blown around by the air current.
Remember, the market has several hvac ductwork sweeps with various features for easy cleaning or optional angles so that you can use them in places with no slope but still require protection from dust.
These small pieces of hardware can make all the difference in keeping your indoor environment cleaner and healthier. They will help protect your building’s surfaces by keeping them clean without interfering with airflow.
Conclusion
As you can see, various duct fittings are typically included in the clamp-together ducting. Each one is designed for a specific purpose, so it’s important to know which will work best for your needs before making your purchase.
